Ankeny Electrical Company handles electrical repair, installation, and panel work for homes and businesses throughout Ankeny and Polk County. Whether you are dealing with a dead outlet, a panel that needs replacing, or a new circuit for a major appliance, we take the call, scope the job on the phone, and get it scheduled. We are available every day from 9 AM to 11 PM.
Call (515) 395-4989 for a quote.
Not the biggest name in town. Just the one that answers. No runaround.
Good electrical work isn't complicated, it's just done right, and that starts with finding out exactly what went wrong before touching anything. A diagnostic visit means tracing the fault to its source: checking the circuit, testing the connections, and telling you what was found before any repair work begins. You get honest recommendations on repairs, never an upsell.
The most common calls we get involve dead outlets, breakers that trip and will not reset, lights that flicker under load, outlets that feel warm or show scorch marks, and partial power loss in one part of the house. That last one, where half the house goes dark, usually points to a failed breaker or a problem at the service connection. It is not a reason to panic, but it is a reason to call.
A thorough diagnosis also checks whether arc-fault or ground-fault protection is in place where it is needed. Older circuits often lack AFCI and GFCI protection entirely, and a safety inspection can surface that before it becomes a bigger problem. We'll find the fault and fix it right.
Most electrical upgrades start small: an outlet that stopped working, a switch that needs replacing, a ceiling fan that was never properly wired. We handle GFCI and AFCI outlet installation and replacement throughout the home, including bathrooms, kitchens, garages, and outdoor locations where ground-fault protection is required. Dimmer switches, standard toggle switches, and smart-switch wiring all fall under the same visit.
Ceiling fan installation is one of the more common calls we get, whether there is an existing fixture to work from or a new box and wiring run is needed. We'll get the job wired and finished.
Lighting work ranges from recessed LED installation in a finished ceiling to under-cabinet lighting in a kitchen remodel. Outdoors, we handle landscape lighting, security lights, motion-sensor fixtures, and post lights. A lighting installation visit covers the fixture, the wiring, the switch, and any box work needed to support the load.
Large appliances need their own circuits. Dryers, washing machines, refrigerators, and chest freezers all draw enough current that sharing a circuit causes problems over time. We run dedicated circuits sized to the appliance and confirmed against the panel's available capacity. That includes the dedicated circuit and disconnect for an air conditioning unit, covering the electrical supply side of the installation.
Hardwired smoke detectors and carbon monoxide detectors are another common installation. Hardwired units with battery backup are more reliable than standalone battery-only detectors, and interconnected units throughout the home mean every alarm sounds when one triggers. Bathroom exhaust fan wiring rounds out the everyday safety work we handle. We show up ready to wire.
Small businesses, offices, and retail properties in Ankeny and across Polk County run into the same electrical issues as residential customers, often at worse times. A tripped breaker during business hours, outlets that cannot handle modern equipment loads, or lighting that has never been updated are all jobs we scope and schedule.
Commercial calls cover panel capacity checks, circuit additions, lighting upgrades, outlet and switch work, and troubleshooting for equipment that is pulling power inconsistently. Homes in this area were wired in different decades, and it shows in the panels. That is just as true of older commercial buildings in the area, where a panel that made sense for 1980s equipment may not be keeping up with current demand.
Commercial jobs are scoped on the phone before anything is scheduled, so the rate and the scope are both clear going in. Reach out and we'll get it diagnosed.
Iowa's four-season climate brings real electrical demands. Air conditioning runs hard through summer, heating loads climb in winter, and the storm season between brings severe thunderstorms, tornadoes, and ice storms that test every circuit in the house. The three services below address what that climate puts on a home's electrical system.
A panel upgrade starts with evaluating what the current panel can carry and where it falls short. Older panels in Ankeny homes were sized for the appliance loads of their decade, and many are running at or past capacity before a single EV charger or heat-pump circuit is added. The upgrade replaces the panel, updates the connections, and confirms that the service entrance can support the new load.
The scope of the electrical work is priced before it starts, so you know what the panel replacement involves before anyone shows up. For homes adding EV chargers or major appliances, a panel upgrade is often the first step.
Generator hookup work covers the circuit from the panel to the generator location, the transfer switch installation, and load capacity confirmation. The transfer switch is the critical piece: it isolates your home from the utility line before the generator takes over, which protects both the equipment and anyone working on the line outside.
Iowa storm season and the occasional winter ice storm make backup power a practical consideration in Polk County rather than an edge case. A power outage that lasts a few hours is an inconvenience. One that runs through the night in January is a different situation. We'll make your wiring safe again.
A panel-mounted surge protection device intercepts voltage spikes before they reach the circuits and appliances connected to your panel. Iowa's thunderstorm season sends surges through the utility grid regularly, and a direct or nearby strike can push enough voltage to damage electronics, appliances, and HVAC equipment in seconds.
Whole-home surge protection is a single installation at the panel. It does not replace point-of-use surge strips for sensitive equipment, but it handles the large spikes that strips are not sized to absorb.
Getting your electrical problem handled starts with a quick call, and for older homes, that call often leads to a safety inspection before any other work is planned. Whole-home rewiring is warranted when the existing wiring is knob-and-tube, aluminum branch-circuit wiring, or deteriorated cloth-insulated cable that no longer meets current standards.
Knob-and-tube wiring lacks a ground conductor and was never designed for modern load levels. Aluminum branch wiring, common in homes built in the 1960s and 1970s, expands and contracts with heat in ways that loosen connections over time. Both are manageable, but both require a clear-eyed assessment before any work is scoped.
An electrical safety inspection is the right starting point. It identifies what is in place, where the gaps are, and what the rewiring would actually involve. We'll make your wiring safe again.
If you're not sure your panel can handle the load, that is the first question a Level 2 charger installation answers. A 240-volt dedicated circuit is required for any Level 2 charger, and the panel has to have the capacity to support it before the circuit is run. We confirm panel capacity on the call before the visit is scheduled.
The installation itself covers the dedicated circuit, the outlet or hardwired connection at the charger location, and any panel work needed to support the new load. For homes where the panel is already near capacity, an upgrade and a charger installation can be scoped and completed together. We'll get the job wired and finished.
When you call, the job gets scoped on the phone. That means you hear the rate and what it covers before anything is scheduled. There is nothing to figure out after the fact because the price is confirmed before the visit starts. We work as a local electrician for homeowners and business owners who want to know what they are getting into before anyone shows up.
Pricing-intent questions, whether about a panel upgrade, a rewire, an EV charger, or a simple outlet installation, all get the same answer: call and ask, and you will get a straight answer on the phone.
Call in the morning. Talk it through. Know the options by the end of the call.
We handle electrical work throughout Ankeny and the surrounding communities in Polk County and beyond. That includes Altoona, Johnston, Urbandale, Grimes, Bondurant, Polk City, Huxley, and Ames. If you are in the area and need electrical work scoped, call and we will confirm coverage when you reach us.
We serve Ankeny as our primary area and cover the surrounding communities in Polk County, including Altoona, Johnston, Urbandale, Grimes, Bondurant, Polk City, and Pleasant Hill. We also reach Huxley and Ames for jobs in those areas.
Call (515) 395-4989 and we will confirm coverage for your address when you reach us.
Call (515) 395-4989 and describe what you are dealing with.
We scope the job on the phone, confirm the price, and get you on the schedule before the call ends. We are available every day from 9:00 AM to 11:00 PM.
We ask about the symptom, the location in the home, and any relevant history with the circuit or panel. From that conversation, we give you the scope and the price before anything is scheduled. You decide whether to proceed, and the visit is booked from there.
The price is confirmed on the call based on what you describe. If the diagnostic turns up something that changes the scope, we explain it and price it separately before doing any additional work. Nothing proceeds past what was agreed without a conversation first.
Clear reasonable access to the panel, the affected outlets or fixtures, and any crawl space or attic access that may be needed. If you know which breaker or circuit is involved, note it. Beyond that, no special preparation is required on your end.
Sometimes a diagnostic visit surfaces a condition that goes beyond the original symptom. We explain what was found, what it means, and what the options are. You get that information before any additional work is scoped or priced, so the decision is yours to make.
A repair visit addresses a specific fault: a bad outlet, a tripping breaker, a wiring connection that has failed. A panel upgrade replaces the service panel itself and involves load calculations, service-entrance work, and in some cases coordination with the utility for a meter upgrade. Both start with a call to scope what the job actually involves.
We explain the fault and the fix on-site before work begins and again when the job is complete. If the diagnostic turns up additional concerns, those are described and priced separately before anything is touched. You are kept in the loop at every step.
Most first-time callers want to know what the visit covers, what it costs, and how long the job will take. We answer all three on the call. The scope and the price are confirmed before anything is scheduled, and we give you a realistic picture of what the visit involves.
Ankeny Electrical Company is available every day from 9 AM to 11 PM. Whether the job is a tripped breaker that will not reset, a panel that needs replacing, or a new circuit for an EV charger, the call is the right first step. We'll find the fault and fix it right.
Call (515) 395-4989 for a quote.
Below is a plain-language look at the electrical work we handle across Ankeny and the surrounding Polk County area. Each row covers what the service involves, who it fits best, and one practical detail worth knowing before you call. If your situation does not fit neatly into a row, call and describe it. We will tell you what the job involves and what it costs before anything is scheduled.
| Electrical Service | What the Job Involves | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Ceiling Fan Installation | Fan-rated box installationNew circuit or switch leg wiringFan and light kit connectionReplacement of existing fans | Rooms with no existing ceiling fixture or an existing light box that needs upgrading | A standard light fixture box is not rated for the dynamic load of a spinning fan. Fan-rated boxes are required and are part of every installation we do. |
| Outlet and Switch Installation | GFCI outlet installationAFCI breaker and outlet upgradesDimmer and three-way switch wiringUSB outlet installation | Homeowners upgrading kitchens, bathrooms, exterior locations, or older rooms with outdated outlets | GFCI protection is required by code in kitchens, bathrooms, garages, and exterior locations. We confirm coverage as part of any outlet work in those areas. |
| Electrical Repairs and Troubleshooting | Dead outlet diagnosisFlickering light tracingTripped breaker investigationService-entrance fault checks | Any homeowner or property manager dealing with an unexplained electrical problem | A diagnostic visit covers the panel, the affected circuits, and the outlets or fixtures involved before any repair work begins. |
| Breaker and Fuse Repair | Breaker replacementFuse box assessmentOverloaded circuit diagnosisPanel connection checks | Homes where breakers trip repeatedly under normal loads or fuses blow without an obvious cause | A breaker that trips and resets fine but keeps tripping often points to a load issue rather than a faulty breaker. We identify which it is before replacing anything. |
| Dedicated Appliance Circuits | Dryer and range circuitsSump pump circuit wiringKitchen circuit upgradesPanel connection for new circuits | Homeowners adding a major appliance, finishing a basement, or replacing an appliance that keeps tripping the shared circuit | A dedicated circuit runs directly from the panel to a single outlet or connection point. It prevents load conflicts and is required by code for many large appliances. |
| Whole-Home Surge Protection | Panel-level surge device installationProtection for all connected circuitsCoordination with point-of-use protectorsPost-installation testing | Homes with sensitive electronics, HVAC equipment, or appliances vulnerable to voltage spikes during Iowa thunderstorm season | A single lightning event or utility fluctuation can damage multiple devices at once. Panel-level protection intercepts spikes before they reach the circuits. |
| Lighting Installation | Recessed lightingOutdoor and security lightingMotion sensor lightsLED retrofit wiring | Homeowners upgrading interior lighting or adding exterior lighting for security or curb appeal | Exterior circuits need weatherproof boxes and ground-fault protection. We assess the existing circuit before adding fixtures. |
| Backup Generator Installation | Transfer switch wiringGenerator circuit installationLoad assessmentUtility backfeed prevention | Ankeny homeowners who have experienced multi-day outages from ice storms or severe weather | Iowa ice storms and high-wind events can knock out power for days. A properly wired transfer switch is both a code requirement and a safety requirement for any permanent hookup. |
| Wiring and Circuit Installation | New circuit runsRough-in wiring for additionsAluminum and knob-and-tube wiring repairWhole-home rewiring | Homes being remodeled, expanded, or carrying wiring that no longer meets current load demands | Homes in this area were wired in different decades, and it shows in the panels. Older wiring systems often need a full assessment before any new circuit work is scoped. |
| Older-Home Rewiring | Knob-and-tube wiring replacementAluminum branch wiring repairFull rewire scopingGrounding and bonding updates | Owners of older Ankeny homes still carrying original wiring that cannot support modern electrical loads | Knob-and-tube wiring is incompatible with insulation installed in walls or attics. A rewire assessment identifies what the system holds and what a full replacement involves. |
| EV Charger Installation | 240-volt dedicated circuitGarage or parking area wiringPanel capacity assessmentHardwired or outlet connection | Homeowners or commercial property owners adding Level 2 charging access | Homes with already-loaded panels may need a panel upgrade as part of the same project. We assess capacity before quoting the installation. |
| Electrical Panel and Service UpgradesMost Popular | 200-amp panel replacementLoad calculationsService-entrance upgradesSubpanel installation | Older homes running central air, EV chargers, or electric appliances on a 60- or 100-amp panel | Iowa's heating and cooling seasons put sustained demand on the panel. A panel that cannot carry the load becomes a bottleneck. The scope and price are confirmed before work begins. |
Call (515) 395-4989 to describe your electrical situation and get a quote. We are available daily from 9 AM to 11 PM.
(515) 395-4989