Some electrical problems make themselves known immediately. A panel that trips the moment you run the dryer, an outlet that sparks when you plug something in, a circuit that goes dead with no warning. Those calls go to the front of the line. Others are slower-moving: a light fixture that has been flickering for months, an older panel that has never been looked at, a garage that needs wiring before the new workshop equipment arrives. Summit Electric handles both kinds, and the process is the same either way. You call, you get the price, and an electrician comes out.
Bondurant is a town where the housing stock covers a real range, from older homes that were built when electrical loads were a fraction of what they are today, to newer construction that still needs circuits added as the house fills up. Homeowners, landlords, and small business owners all run into electrical work eventually, and what they need is someone who can look at the actual situation and tell them what it involves. That is what we do.
Good electrical work isn't complicated, it's just done right, and knowing which problems are urgent is part of that. A burning smell near a switch plate, an outlet that is hot to the touch, a panel making noise it was not making last week, or a partial power loss affecting multiple rooms are all situations that need attention the same day. We keep appointments available for calls like those. If you are not sure whether what you are seeing qualifies, call and describe it. We will tell you honestly.
Not every electrical issue is an emergency, and scheduling a visit for something that has been building slowly is often smarter than waiting until it forces your hand. A panel that is undersized for current loads, outlets in a kitchen or bathroom that were never updated to GFCI, wiring in an older home that has not been inspected in years. These are not crises yet, but they are the kind of thing that is easier and cheaper to address before they become one. We take those calls too, and we give you the rate on the phone before anything is booked.
The electrical side of a generator installation is more involved than running an extension cord to a portable unit. A proper hookup means installing a transfer switch at the panel, which isolates the generator from the utility line while it is running. That isolation matters both for the safety of the equipment in your home and for the line workers restoring power in the area. We handle the wiring, the transfer switch, and the panel connection so the system works correctly when the power goes out and comes back.
Intermittent problems are often the hardest to describe and the most important to catch. A breaker that trips only when two specific appliances run at the same time, a light that flickers but only in one room, an outlet that works most of the time. These are circuit-level problems that do not always announce themselves clearly. We trace them to the source rather than guessing, and we explain what we found before any repair work begins. Code-compliant wiring and arc-fault breakers are part of how we leave the circuit when the job is done.
Low-voltage work covers more of a home than most people expect. Doorbell wiring, data drops for home offices and network equipment, and rough-in for security systems all fall on the electrical side. In older homes especially, this wiring is sometimes missing entirely or was run in ways that no longer suit how the house is used. We handle the rough-in and the connections so the finished result is clean and functional.
A fixture swap is straightforward when the existing wiring is in good shape. When it is not, or when recessed LED lighting is going into a ceiling that has never had it, the job involves more than just hanging a fixture. We assess what is there, run circuits where they are needed, and install to code. We treat your home and its wiring the way we would our own, which means the work behind the wall is done as carefully as what you can see.
Switching a light from two or more locations is one of those jobs that looks simple until the wiring does not cooperate. Older homes sometimes have three-way switches that were wired in ways that made sense at the time but create problems when a switch needs to be replaced or a new location added. We work through the existing wiring, identify what is there, and get the switching working correctly without leaving a tangle behind.
Most repair calls start with a symptom, not a diagnosis. Something stopped working, something is making a noise, something does not feel right. The situation that leads to a repair call is usually one of those, and the job is to figure out what is actually causing it. In a town where homes cover a range of ages, that can mean anything from a failed GFCI outlet that has knocked out several downstream receptacles, to aluminum wiring that needs remediation before it can be safely extended, to a breaker that is failing rather than the circuit it protects. We diagnose before we repair, and we explain what we found.
An undersized panel is one of those problems that shows up gradually. More breakers tripping under normal use, no room to add circuits for new appliances or an EV charger, a load calculation that reveals the service entrance was never sized for how the home is actually being used today. We handle 200-amp panel upgrades, subpanel installation where a detached garage or outbuilding needs its own service, and the load calculations that tell us what the home actually requires before we recommend a solution. The full breakdown of what panel work involves is on the service page.
Installation calls come from all directions. A homeowner finishing a basement who needs circuits run before the drywall goes up. A landlord updating a rental unit before a new tenant moves in. A small business adding a dedicated circuit for equipment that cannot share a breaker with anything else. Dedicated appliance circuits, recessed and LED lighting, ceiling fans, outdoor weatherproof outlets, and EV charger wiring are all part of what we install. The situation varies, the work varies with it, and we scope it on the call so you know what is involved before we schedule.
For what the job actually entails, the page on wiring work lays it out.
The price for electrical work depends on what the job actually involves, and that is not always clear until someone looks at the existing wiring, the panel, and the location where the work is going in. We go over the job with you on the phone and give you the rate before anything is scheduled. You know what it covers and what it costs before an electrician comes out. No-pressure estimates, priced up front, so there is no guessing about what you are agreeing to.
What changes a quote is usually one of a few things: the condition of the existing wiring, whether the panel has capacity for what is being added, whether the work requires a permit, and how accessible the run is. If any of those factors shift the scope, we tell you before we proceed. Call (515) 395-4989 and we will walk through it.
Older homes in a town like Bondurant sometimes have panels, fixtures, or devices that are no longer in regular production. When a breaker brand has been discontinued, or a fixture needs a part that has to be ordered, we tell you that on the visit rather than fitting something that is not the right match. Forcing a modern component into a panel it was not designed for is not a fix, it is a workaround that creates its own problems down the line.
When a part has to be ordered, we confirm what is needed, give you a clear picture of the timeline, and schedule the follow-up as soon as it arrives. For older panels with documented histories of failure, we will also tell you honestly if the better path is a full replacement rather than sourcing a part for a panel that is already past its useful life. We take pride in the electrical work we leave behind, and that means being straight with you about what the situation actually calls for.
Same-day service is often available, especially when you call during our hours of 9:00 AM to 9:00 PM. We are open every day, which means a problem that shows up on a Saturday morning does not have to wait until Monday. For urgent situations, calling early in the day gives us the best chance of getting someone out the same day. For planned work, we confirm the appointment window when you call so you know when to expect someone.
If the property has a tenant or a business that has to stay open, tell us when you call. We work around occupied spaces regularly, and knowing the situation in advance means we can plan the visit so the disruption is as short as possible. With a local company, your questions go straight to the people doing the work.
We serve Bondurant and take calls from customers throughout Polk County and the communities nearby. That includes Altoona, Mitchellville, Valeria, Pleasant Hill, and Elkhart. If you are just outside Bondurant and not sure whether we cover your address, call and ask.
A converted space almost always needs dedicated circuits rather than tapping into whatever is nearest. Lighting, outlets, and any heating or cooling supply for the new space each have their own load, and adding them to an existing circuit that is already carrying a full load creates an overload risk. We assess the panel capacity and run the circuits the converted space actually needs.
A quote is based on what we can see and assess before work begins. If we open a wall or a panel and find conditions that were not visible during the initial assessment, such as damaged wiring, a previous repair done incorrectly, or a panel that is in worse shape than it appeared, we stop and explain what we found before continuing. You are told what changed and what it costs before we proceed.
Yes. We serve Bondurant as our primary area and take calls from Mitchellville, Valeria, Altoona, Pleasant Hill, Elkhart, and other communities throughout Polk County. If you are not sure whether your address is in our coverage area, call (515) 395-4989 and we will confirm it on the spot.
Older homes in the area tend to generate calls around aging panels, outlets that were never updated to GFCI or AFCI protection, and wiring that has not been looked at in years. Newer construction more often needs circuits added as the house fills up, or a panel assessment before an EV charger or large appliance is added. Both ends of that range are work we handle regularly.
A dryer requires a dedicated 240-volt circuit, a specific outlet type, and a breaker sized for the load, none of which a standard 120-volt outlet circuit provides. Running a dryer on an undersized circuit or a shared circuit is both a code issue and a fire risk. We install dedicated dryer circuits and the correct outlet as a standalone job or as part of a larger project.
Yes. If something is not right after we finish, call us at (515) 395-4989 and we will work out what needs to happen next. We stand behind the work and we do not consider a job closed if there is still something that needs to be addressed.
Discoloration inside the panel around a breaker or a bus bar is a sign that heat has built up there, which points to a loose connection, an overloaded circuit, or a failing breaker. It is not a cosmetic issue. Call us at (515) 395-4989 and describe what you are seeing. We will advise whether it is something to address immediately or whether it can wait for a scheduled visit.
For most routine work like outlet replacement, lighting, or ceiling fan installation, children being in other parts of the home is not a problem. For larger jobs that involve the panel or that require circuits to be shut down for extended periods, it is worth talking through the scope on the call so you can plan accordingly. We let you know what to expect before we arrive.
That outlet you have been meaning to get looked at, the panel that has been tripping more than it used to, the generator hookup you have been planning since last winter. Call Summit Electric at (515) 395-4989 today. We are open every day from 9:00 AM to 9:00 PM, the price is confirmed before anything is scheduled, and work is performed by licensed electricians who explain what they find. Today is as good a day as any to get it handled.
Check our list of local areas. We also work in: Altoona, Pleasant Hill, Saylorville.
Below is a quick look at the electrical services we handle for homes, rentals, and businesses in Bondurant and across Polk County. Each row covers what the service includes, who it fits best, and a practical note to help you think through the job before you call. If a service is not listed or your situation does not fit neatly into one category, call us and we will walk you through it.
| Service Type | What's Included | When You Need It | Things to Know |
|---|---|---|---|
| Outlet & Switch Installation |
| Homeowners upgrading older outlets or adding new ones in kitchens, baths, garages, or outdoors | Current code requires GFCI protection in kitchens, bathrooms, garages, and outdoor locations. Many older Bondurant homes are missing these entirely. |
| Basement & Sump-Pump Circuits |
| Homeowners finishing a basement or adding sump protection in an Iowa home | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit with proper GFCI protection is the right setup for any basement in a region with spring thaw and heavy rain. |
| Wiring & Circuit Installation |
| Older homes with outdated wiring or any property adding circuits for new loads | Bondurant has a mix of housing ages. Knob-and-tube and aluminum wiring are both present in older neighborhoods and both present real concerns worth addressing. |
| EV Charger Installation |
| Homeowners adding a Level 2 charger in a garage or driveway | Older panels sometimes need an upgrade before a Level 2 charger circuit can be added. We check panel capacity first so any needed upgrade is identified and scheduled before installation day. |
| Electrical Panel UpgradesMost Popular |
| Homeowners with older panels, repeated tripping, or new loads like EV chargers that exceed current capacity | A 100-amp panel that was adequate in 1975 is often not adequate for a home that now has a home office, an EV charger, and a modern kitchen. We size the new service for what the home actually needs. |
| Electrical Safety Inspections |
| Home buyers, sellers, landlords, and owners of older homes with wiring that has not been reviewed in years | If the inspection turns up items that need attention, we explain what they are and what fixing them involves. You get the information before deciding on anything. |
| Dedicated Appliance Circuits |
| Anyone adding a high-draw appliance that needs its own breaker | High-draw appliances on shared circuits cause repeated tripping and can damage the appliance over time. A dedicated circuit is the correct fix. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or renter with an unexplained electrical problem | We trace the problem to its source before recommending any work, so you know exactly what is wrong and what fixing it involves. |
| Lighting Installation |
| Homeowners, landlords, and commercial property managers updating or adding lighting | Exterior lighting for rental properties and commercial buildings often requires a new circuit rather than tapping an existing one. We confirm capacity before running wire. |
| Breaker & Fuse Repair |
| Homes with breakers that trip repeatedly or fuse boxes that need attention | A breaker that trips under normal load often points to an overloaded circuit or a failing breaker, not just a nuisance. We find out which before touching anything. |
| Whole-Home Surge Protection |
| Any Bondurant homeowner concerned about lightning strikes or utility voltage fluctuations | Central Iowa sees significant lightning activity in storm season. A panel-mounted surge protector covers every circuit in the house, not just what is plugged into a power strip. |
| Wiring for Additions & Remodels |
| Homeowners finishing a basement, adding a room, or remodeling a kitchen or bathroom | Electrical rough-in is one of the first trades on-site in a remodel and one of the last to finish. We coordinate around the project schedule so the work does not hold up other trades. |
| Ceiling Fan Installation |
| Homeowners replacing a fixture or adding a fan where no wiring currently exists | If there is no existing wiring, we install a proper brace box rated for the fan weight so the ceiling support is correct from the start. |
| Backup Generator Installation |
| Homeowners in Bondurant who want power protection during Iowa ice storms and severe weather | A properly wired transfer switch isolates the generator from the utility line, which protects both your equipment and line workers restoring power in the area. |
| Older-Home Rewiring |
| Owners of pre-1970s homes in Bondurant with wiring that has never been updated | Rewiring an older home is a significant project, but it is often the only way to make the electrical system safe and capable of carrying modern loads. We scope the work carefully before any walls are opened. |
Call (515) 395-4989 and we will walk you through what the job involves, what it costs, and when we can get someone out.
(515) 395-4989